TASCAM DR-40X
75
15 – Messages
Message
Details and responses
File Protected
The file is read only and cannot be erased.
No Card
No SD card is loaded in the unit. Insert a recordable SD card.
No PB File
There is no file that can be played back. The file might be damaged.
No MUSIC File
There is no playback file, so DIVIDE cannot be executed.
Cannot overdub!
See REC setting
You cannot overdub when there are two 96kHz WAV/BWF or MP3 format playback files.
Mix them down to one file before overdubbing.
Using by Input
The MS decoder is being used on the input. To use it on monitoring, on the
REC MODE
screen, set
MS
DECODE
to
OFF
.
Now DUAL REC
To change the LEVEL MODE function when in dual recording mode, use the
REC MODE
screen.
Now OVERDUB
The MS decoder cannot be used in overdubbing mode.
Virtual File!
Virtual files cannot be played back or added to playlists.
To play the file back use
FILE SWAP
.
Can't File Swap
FILE SWAP
cannot be used with projects that have only one file.
Now Auto Rec
When auto-recording is enabled, the Self Timer does not function. Set
AUTO REC
to
OFF
on the
REC
SETTING
screen.
Not Continued
If any of these errors occurs, turn the unit’s power off and restart it.
If the power cannot be turned off, remove the batteries, disconnect the TASCAM PS-P520E AC adapter
(sold separately), and/or disconnect the USB cable for bus power supply.
If these error messages continue to appear frequently, please contact the store where you purchased
this unit or TASCAM customer support service.
File Error
Can't Save Data
Player Error
Device Error
Writing Failed
Sys Rom Err
System Err XX
(XX is a number.)
