TASCAM CD-9010
35
8 – Using the remote connectors
Using the parallel connector
Using the REMOTE (PARALLEL) connector, you can control this
unit with an external controller.
The pin assignments are as follows.
Pin
Function
IN/OUT
1
ON LINE PLAY IN
IN
2
MONITOR PLAY IN
IN
3
STANDBY IN/PAUSE (JOG ON) IN**
IN
4
STANDBY IN
IN
5
STOP IN
IN
6
TRACK SEARCH REV IN [
.
]
IN
7
N.C
–
8
TRACK SEARCH FWD IN [
/
]
IN
9
SEARCH REV IN [
m
]
IN
10
SEARCH FWD IN [
,
]
IN
11
MONITOR PLAY TALLY
OUT
12
STANDBY TALLY
OUT
13
STANDBY TALLY/
PAUSE (JOG ON) TALLY**
OUT
14
STOP TALLY
OUT
15
INDEX SEARCH REV IN [
s
]
IN
16
INDEX SEARCH FWD IN [
w
]
IN
17
ON LINE PLAY TALLY
OUT
18
CUE UP
IN
19
ON LINE IN
IN
20
EOM OUT
OUT
21
FADER START/STOP IN
IN
22
ON LINE TALLY
OUT
23
TEN KEY 0
IN
24
TEN KEY 1
IN
25
TEN KEY 2
IN
26
TEN KEY 3
IN
27
TEN KEY 4
IN
28
TEN KEY 5
IN
29
TEN KEY 6
IN
30
TEN KEY 7
IN
31
TEN KEY 8
IN
32
TEN KEY 9
IN
33
CD_TALLY
OUT
34
Reserved
–
35
CUE UP_TALLY
OUT
36
GND
–
37
+5V*
–
IN:
Active low external command reception
(operates when at ground 50 ms or longer)
OUT:
Signal for tally output display by open collector
(50V maximum voltage, 100mA maximum current)
*100mA maximum supplied current
**Use the
P.PORT P3/13 ASGN
item on the
REMOTE
menu screen
to set their functions. (See "Parallel port 3-pin/13-pin setting"
below.)
The following is an example of a connection for playback control
of this unit using fader start/stop.
START
STOP
Pin21
FADER START/STOP IN
Pin36 GND
REMOTE（PARALLEL）
Parallel port 3-pin/13-pin setting
You can set the functions of the unit's REMOTE (PARALLEL)
connector 3-pin and 13-pin.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
REMOTE
menu screen.
3. Select
P.PORT P3/13 ASGN
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to set the
REMOTE (PARALLEL)
connector 3-pin and 13-pin functions.
Options
:
PAUSE
,
STANDBY
(default value)
Pin
number
P.PORT P3/13 ASGN
setting
PAUSE
STANDBY
3
PAUSE (JOG ON) IN
STANDBY IN
13
PAUSE (JOG ON)
TALLY
STANDBY TALLY
6. After completing the setting, press the
HOME
button to
return to the Home Screen.
NOTE
The pin assignment setting is retained even when the power is
turned OFF.
