background image

TASCAM  CD-200SB

 39

7 – Dubbing (copying)

Dubbing

1.  Load the dubbing source CD.

If the dubbing source CD is a data CD, press the main unit 

or remote MEDIA SELECT button to set the dubbing source 

media to CD. (See “Selecting the playback media” on page 

19.)
Set the playback area to 

ALL PLAY

 or 

FOLDER

 as necessary. 

If set to 

FOLDER

, use the main unit or remote FOLDER 

g

/

t

 buttons to select the folder that you want to dub. (See “5 

– Browsing” on page 30.)

NOTE

When dubbing an audio CD, setting the playback area is not 

necessary. 

2.  Press the MEDIA SELECT button on the main unit or the 

remote to select the dubbing destination media (SD card or 

USB flash drive). 

-SD-

 or 

-USB-

 will appear on the display. 

NOTE

• 

If only one type of media—an SD card or a USB flash drive—

is loaded, that media will be the dubbing destination 

regardless of the current media setting made using the 

MEDIA SELECT

 button on the main unit or the remote. 

• 

If both an SD card and a USB flash drive are loaded and the 

media selected using the 

MEDIA SELECT

 button on the 

main unit or the remote is either SD card or CD, the CD will 

be dubbed to the SD card. If the media selected is the USB 

flash drive, the CD will be dubbed to the USB flash drive. 

3.  Press the main unit DUBBING [WAV/MP3] button while 

pressing and holding the DISPLAY [SHIFT] button or press 

the remote WAV/MP3 button to set the file format used 

when writing to the dubbing destination. 

DUB WAV

DUBMP3HQ

DUBMP3MQ

DUBMP3LQ

Cycle through dubbing destination file formats

Dubbing file format settings

Display

File format 

DUB WAV

44.1kHz 16-bit stereo WAV

DUBMP3HQ

 (default value) 44.1kHz 256kbps stereo MP3

DUBMP3MQ

44.1kHz 128kbps stereo MP3

DUBMP3LQ

44.1kHz 64kbps stereo MP3

When the current format setting is shown, press the main 

unit DUBBING [WAV/MP3] button while pressing and 

holding the DISPLAY [SHIFT] button or the remote WAV/

MP3 button again to cycle through the setting options. 

NOTE

The dubbing destination file format setting is retained even 

when the power is turned OFF. 

4.  Press the main unit DUBBING [WAV/MP3] button or the 

remote DUBBING button.

WAIT

 appears on the display as the unit begins checking the 

dubbing destination media. 

5.  After the dubbing destination media has been success-

fully confirmed, 

SEL FLDR

 appears on the display and the 

FOLDER/TRACK SELECT (1–10/0) button indicators blink or 

light. 

Blinking indicators show that no direct folder has been 

assigned to that button. Lit indicators show that a folder has 

been assigned.

Summary of Contents for CD-200SB

















































Reviews: