16
TASCAM BB-1000CD/BB-800
based on this setting.
1
Press the
HOME
key to open the Home screen.
2
Press the
MENU
key to open the MENU screen.
3 Use the
DATA
wheel or
CURSOR
[
§
/
¶
] keys to select
SETUP
, and press the
ENTER
key.
The
SETUP
screen appears.
4
Use the
CURSOR
[
§
/
¶
] keys to select the
DATE/TIME
item, and press the
ENTER
key.
The
DATE/TIME
screen appears.
5
Use the
DATA
wheel to adjust the value. Use the
CURSOR [
§
/
¶
/
˙
/
¥
] keys to move the cursor.
6
After making the setting, press the
F1
key to to return
to the SETUP screen and start the clock.
Precautions about using the remote control
Remove the batteries if you do not plan to use the remote
•
control for a long time (longer than a month).
Using this remote control while other equipment that
•
can be controlled with infrared rays is operating nearby
might cause that equipment to function improperly.
Aim the remote control unit at the remote sensor.
•
Obstacles could interfere with operation by the remote
control.
STOP
Ô
RECORD
PLAY/READY
˚
ª
Â
º
¥/π
¯
Remote sensor
Operating distance
Head-on to the sensor: 7 m
15° left/right from the sensor: 4 m
Turning the power on and off
Turning the power ON
Slide the
POWER
switch on the left side of the unit to
ON
.
The Home screen opens after the startup screen disappears.
Turning the power OFF
Slide the
POWER
switch to
OFF
.
CAUTION
Do not turn the power OFF when a media indicator (CD
or SD) is flashing because the unit is writing data.
Setting the date and time
Set the current date and time of the built-in clock. The time
information of files recorded by this unit to an SD card is
3 – Preparation
