No. Message
Meaning
Action
9
Import file not
found. Use
USB OPEN to
import file.
Press [
EXIT
].
The file selected (backup file, WAV file for
import, or SMF) is not available.
Press
NO/EXIT
, use the USB OPEN function
to transfer the appropriate file to the FAT parti-
tion and then try importing again.
10
Invalid Fs rate detect-
ed. Check
your system
set-up.
Press [
EXIT
].
Digital audio input mode has been selected, but
the 2488MKII has detected the wrong sampling
frequency (Fs) for the incoming digital audio to
be used.
Press
NO/EXIT
and check the digital audio
source. The output should be 44.1 kHz (note
that some players output 48 kHz). A unit with
varispeed (pitch control) may have varispeed
turned on, altering the sampling frequency from
44.1 kHz.
11
Master track is
too short. Use
PRE-MASTERING
to correct it.
Press [
EXIT
].
The master track is too short, and therefore
cannot be checked.
Press
NO/EXIT
, re-set the OUT point to at least
four seconds after the zero point, then use the
PRE-MASTERING function for checking.
12
MTC slave mode
selected.
Cannot do this
operation now.
Press [
EXIT
].
Since the unit is currently slaved to external
MIDI timecode, the selected operation cannot
take place. Operations not possible in MTC
slave mode include: pitch control and SSA,
repeat playback, auto-punch operations, jog
and trim as well as audio CD playback and
digital audio input.
Press
NO/EXIT
and use the menu system
(SYNC/MIDI->SYNC) to select INTERNAL sync.
13
No file for import
has been found.
Change CD [
YES
],
else press [
NO
]
No WAV file for import has been discovered on
the loaded CD.
Press
YES/ENTER
to change the disc (use an
ISO9660 formatted disc which contains audio
data with 44.1 kHz sampling frequency in WAV
format) or NO to cancel the operation.
14
No free hard
disk space, Use
DELETE UNUSED
to make space.
Press [
EXIT
].
The hard disk is full, and the current operation
has failed because it needs hard disk space.
Press
NO/EXIT
and use one of the
SONG
menu operations such as DELETE UNUSED or
ERASE to free up some space (these opera-
tions cannot be undone).
15
No LAST REC
point. Use
IN-OUT instead.
Press [
EXIT
].
Can’t use the last recording point for auto
punch operations, as no recording has been
done yet.
Press
NO/EXIT
and set the IN and OUT points
as the punch positions. Use the
RHSL
key to
refine these points if necessary, by rehearsing
takes without recording.
16
No locate
markers have
been set.Use
INSERT MARK.
Press [
EXIT
].
Because there are no mark points currently set,
a location command cannot be performed.
Press
NO/EXIT
, and use the
INSERT
key from
the home screen to add some mark points at
the appropriate positions.
17
No master track
found. Use
PRE-MASTERING
to create one.
Press [
EXIT
].
There is no master track available for making an
audio CD.
Press
NO/EXIT
, then use the RE-MASTERING
function to create the master track.
Appendix
11
TASCAM 2488MKII