TAROT
@2016 TAROT All Rights Reserved.
1
1
4. Channels
（
1
）
RC Mapping
（
2
）
Control Mode
Tilt Channel
Push the stick, and observe the rotation direction of the gimbal and the
moving direction of the cursor.
Mode Channel
This channel controls gimbal working mode. Choose a three-positioned or
two-positioned switch to control the working mode of the gimbal. Map it into
Mode Channel.
Toggle the switch to the position, the cursor should be in the corresponding
area.
FPV Mode
:
the direction of the gimbal and directions (roll and tilt) of the
multi-rotor are same.
Lock Mode
: the head of the multi-rotor and the gimbal are in the same
direction.
Methods to control gimbal rotation by R/C (tilt only).
Push sticks to observe
the moving direction of the cursor and rotation direction of the gimbal.
Rate Mode
：
The position of the stick is corresponding to the rotate speed of the
gimbal.
Angle Mode
：
The position of the stick is corresponding to the angle of the
gimbal.
