CHROMA-CUE Installation Guide
9
Setup
Introduction
The included
Chromatron
software allows you to
•
configure the CHROMA-CUE for use with specific
lighting fixtures,
•
create and load lighting designs, and
•
update fixture profiles and controller firmware.
This section describes how to configure the controller. The
other features are described in the
Chromatron
help file.
Software installation
Chromatron
requires Windows XP. Install the software as
follows:
1. Place the CD-ROM in the drive. If autoplay is
enabled, an installation dialog opens automatically
after loading the CD-ROM.
2. If the installation dialog does not open, you must run
the
boot.bat
file on the CD-ROM. Select
Run
from
the
Start
menu, enter [CD-ROM drive
letter]:boot.bat, and click
OK
.
3. From the installation menu, select whether you want
to download and install the latest version of the
software from the Internet (recommended), or the
version on the CD-ROM.
4. Review and acknowledge the user agreement. Click
Next
.
5. The installation wizard opens. Follow the
instructions on screen to complete the process.
Summary of Contents for Chroma-Cue
Page 1: ...Chroma Cue installation guide WWW TARGETTI COM...
Page 2: ...Dimensions...
