CHROMA-CUE Installation Guide
7
Connections
Controller to power supply
Connect a UTP patch cable (provided) between the RJ-45
socket on the back of the controller and the
OUT
socket on
power supply
before
connecting the power supply to AC.
When power is applied to the power supply, all 3 LEDs will
light for 2 seconds and then the "ON" LED will illuminate
green. The “CONNECT” LED illuminates green when the
controller is connected and receiving power.
Power supply to lights
Connect another UTP patch cable (not included) between
the power supply’s
IN
socket and the DMX input on one of
the lights. If the light does not have an RJ-45 socket, you
will need a 3-pin or 5-pin XLR-to-RJ45 adaptor that
connects the pins as shown below.
Summary of Contents for Chroma-Cue
Page 1: ...Chroma Cue installation guide WWW TARGETTI COM...
Page 2: ...Dimensions...
