Installation
Controller and bracket
The CHROMA-CUE is designed
to be wall-mounted using the
included bracket. To mount:
1. Loosen the set screw on
the bottom of the
CHROMA-CUE with a 2
mm hex wrench and
remove the wall bracket.
2. Center the bracket on the
desired mounting position
with the hooks pointing up.
3. Fasten the bracket to the wall with four suitable
screws (not included).
4. Plug the included 5 m UTP patch cable into the
RJ-45 socket on the back of the controller.
5. Place the controller on the bracket and slide it down
over the hooks.
6. Tighten the set screw a few turns to hold the
controller in place.
Do not over tighten: stop as
soon as you feel light resistance!
Power supply
Install the power supply in a dry location within a 40 meter
cable run of the controller.
6
CHROMA-CUE Installation Guide
Summary of Contents for Chroma-Cue
Page 1: ...Chroma Cue installation guide WWW TARGETTI COM...
Page 2: ...Dimensions...
