30
Playing a DVD or Video CD
Notes on general features:
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 20).
• If you press
>
once during Repeat Chapter (Track)
playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
• When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
will blink on the TV screen during scenes recorded at
different angles as an indication that angle switching
is possible
.
• The A-B repeat function is available only in the cur-
rent track of the Audio CD.
• If you
.
once within 4 seconds after the
chapter/track has started, the playback goes to the
previous chapter/track.
Additional features
Marker Search
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
The marks remain set until you stop playback by press-
ing the STOP button twice or by powering the device
off.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press
b
/
B
to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
Last Scene Memory
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the player or switch off the
player. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.
VCD
ACD
DVD
DivX
VCD
DVD
V1503P1Z.NA6ITTA_S_38U 12/09/2007 12:07 PÆgina 30
Time Search
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press
v
/
V
to select the time clock icon and
“--:--:--” appears.
3. Use numerical buttons to input the required start
time in hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press CLEAR
to remove the numbers you entered. Then input the
correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
DivX
VCD
DVD
