Operation
27
Additional Operation - VCR part
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1. Press
i
.
Press
1
or
2
to select
.
Press
ENTER/OK
.
2. Press
3
or
4
to check a problem.
ANTENNA CONNECT
O
PLEASE CHECK:
Connect the aerial into the jack securely.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O
NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O
2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O
PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3. Press
i
to remove the menus from the TV screen.
Wide Screen Compatibility 16:9
Your DVD+VCR can record and play back wide screen
aspect ratio programmes (16:9). To record a wide
screen format programme successfully the correct type
of wide screen signal must be broadcast by the TV sta-
tion.
1. Switch on your DVD+VCR.
Press
i
.
Press
F
or
G
to select
.
Press
ENTER/OK
.
2. Press
v/V
repeatedly to select:
AUTO, 4:3
or
16:9
.
AUTO (Playback mode only)
Automatically plays back Wide-Screen programmes
as Wide-Screen and Normal programmes as normal.
4:3
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
3. Press
i
to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must connect
your VCR to the TV using a SCART cable.
1W Mode (Power save Mode)
Set 1W ON/OFF to ON to place your DVD+VCR into an
economic power save mode.
Nothing is displayed in the display window.
1
Press
i
.
The main menu will appear on the TV screen.
Press
F
or
G
to select the
1W ON/OFF
.
Press
ENTER/OK
.
2. Press
D
or
E
to select the ON.
3
Press
i
.
Notes:
Some function may not be operated in the 1W Mode.
•
The 1W Mode is not available in the standby mode
for the timer recording and when turn Power off of the
DVD+VCR after receiving the encoded television sig-
nals (CANAL+ or PREMIERE).
•
The encoded television signals (CANAL+ or PRE-
MIERE) are not decoded in the 1W Mode.
SYS
1 2
SET
OSD
ON
OFF
OSD
f
ACMS
Pr-12
PSET
R
i
ANTENNA CONNECT
PLEASE CHECK
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
SYS
1 2
SET
OSD
ON
OFF
OSD
f
ACMS
Pr-12
PSET
R
SYS
1 2
SET
OSD
ON
OFF
OSD
f
ACMS
Pr-12
PSET
R
AUTO
4:3
16:9
i
V1503P1Z.NA6ITTA_S_38U 12/09/2007 12:07 PÆgina 27
