background image

ACTIVATE TRUNK RELEASE

1  Press and hold the Trunk Button on the remote for 3 seconds.
2  The park lights will flash and the siren will chirp two times.
3  The doors will unlock and the Starter Disable will deactivate. (optional)
4  The LEDs will stop flashing.

NOTES:

 

 - For safety, the trunk release will not active when ignition key is ON.

** Optional Feature may require additional parts

PRESS & HOLD

  

1  Press and release the Arm/ Lock button on the remote transmitter. 
2  The park lights will flash and the siren/ horn will chirp one time. 
3  The doors will lock and the Starter Disable will activate. (optional)
4  The LED will start flashing within five seconds.
5  Once Armed, the alarm can be triggered by the shock sensor (impact to 

vehicle), door inputs (opening door / hood), turning on ignition.

NOTES:

- If a door is open or delay dome light is 30 seconds after arming, system with chirp 3 

times to indicate door input is bypassed until door is closed or dome light turns off.

 - If system is programmed for silent arming, siren will not chirp when arming, but park 

lights will still flash.

 - If system is in valet mode, doors will lock, but siren will not chirp and lights will not flash.  

LED indicator will be on solid.  

See Valet / Service Mode in this manual for further information

ARM SYSTEM / LOCK DOORS

PRESS & RELEASE

SYSTEM PROGRAMMING - 

Menu 1

PAGE 6

OWNER'S  MANUAL

TRANSMITTER FUNCTIONS

AL.1

DRIVER'S DOOR PRIORITY UNLOCK

1  Press then release the Disarm / Unlock button on the remote transmitter.
2  The park lights will flash and the siren will chirp two times.*
3  The driver's doors will unlock and the Starter Disable will deactivate. (optional)
4  The LEDs  will stop flashing.
5  Press the Disarm / Unlock Button a second time within 3 seconds and the other 
doors will unlock.

** Optional Feature may require additional parts

DISARM SYSTEM / UNLOCK DOORS

1  Press then release the Disarm / Unlock button on the remote.
2  The park lights will flash and the Siren will chirp Two times.*
3  The doors will unlock and the Starter Disable** will deactivate.
4  The LEDs  will stop flashing.

NOTES:

 

 - If the alarm was active (siren sounding), the first press of the unlock button will turn off 

the siren and the second press will unlock / disarm.

 - Siren will chirp 3 times if alarm was triggered while armed.  

See alarm diagnostics 

section of manual for further information

 - 

If system is programmed for silent disarm, siren will not chirp when disarming, park 
lights will flash 2 times. 

Contact installer if you do not want this feature.

- If system is in valet mode, siren will not chirp and park lights will not flash but doors will 

unlock. The LED will be one SOLID.  

See Valet / Service Mode section of manual for 

further information.

** Optional Feature may require additional parts

PRESS & RELEASE

PRESS TWICE

SYSTEM PROGRAMMING - 

Menu 1

PAGE 7

OWNER'S MANUAL

TRANSMITTER FUNCTIONS

AL.1

Summary of Contents for AL.1













Reviews: