ADDITIONAL LED FUNCTIONS
While the system is disarmed and the ignition is in the off position, the
LEDs will activate from the following triggers.
1) If the door is opened the LEDs will stay on until the door is closed.
2) If the hood is opened the LEDs will stay on until the hood is closed.
3) If the shock sensor detects vibration the LEDs will turn on momentarily.
4) If the auxiliary sensor input is activated the LEDs will activate momentary.
VALET MODE / EMERGENCY OVERRIDE
This feature will disable or re-enable the alarm without the use of the remote transmitter. This
feature will work when alarm in either an armed, disarmed or triggered state. When the system's
override had been activated, the door lock’s and trunk features will still be operational however
the alarm will be deactivated.
.
Turn the Ignition Key ON
(Leaving the key ON)
Press and hold the valet switch for 8
to 15 seconds (Time depends on
"Valet Settings" Program Option)
2 CHIRPS = OFF
5 CHIRPS = ON
The LED status light will come on "STEADY" to confirm Valet Mode is ACTIVE
The LED status light will be "OFF" to confirm Valet Mode is NOT ACTIVE and system is in normal
alarm operation mode.
Siren will chip 5 times to confirm Valet Mode / Emergency Override
has been activate or 2 times for deactivate (If alarm was in a triggered
state, the siren will shut off and park lights will stop flashing)
SYSTEM PROGRAMMING -
Menu 1
PAGE 11
OWNER'S MANUAL
VALET MODE
AL.1
FEATURE NOTES
Lock, Unlock, Driver's Door Priority Unlock, Trunk Release and the Auxiliary Output are optional
outputs. Enabling these features requires custom installation & programming. These features
may not be compatible with some vehicles.
For safety reasons the trunk release output will not activate when the ignition is in the on
position.
Note: Padloc and 2nd car operation are features that require special programming.
Some features may not be available on all vehicles. Contact your dealer for more information.
ACTIVATING ANTI CAR JACK MODE
SYSTEM PROGRAMMING -
Menu 1
PAGE 10
OWNER'S MANUAL
ANTI CAR JACK MODE
AL.1
Type-1
- The timer will start if the door is opened or if the button is held for 3 seconds
while the ignition is on.
Type-2
- The timer will start if the door is opened or if the Trunk button is held for 3 seconds
while the ignition is on. The timer will also start every time the ignition is turned on.
When programmed the Anti Car Jack timer is triggered when a door is opened or the key
is pressed on the remote while the ignition is on. Type 2 Car Jack Mode will trigger the timer
with the door and trunk button as well as each time the ignition is turned on.
If Anti Car Jack is triggered, there will be no indication in the first 20 seconds.
After 20 seconds the LED will begin to flash rapidly to indicate that the Car Jack feature is
active. After an additional 20 seconds the siren will then start to chirp each second for an
additional 20 seconds.
The alarm will now activate, the ignition will interrupt, parking lights will flash, and the siren will
alert indicating trouble. The lights and siren will pause momentarily between each one minute
cycle, and repeat until disarmed.
Note- Turn the ignition key off before opening the door to avoid triggering the Anti Car Jack
Feature. Pressing and releasing the valet button with the key on during the first 60 seconds will
stop the Car Jack timer.
To disarm the Anti Car Jack timer process during the initial 60 seconds of activation, turn the
ignition key off then on, then press the valet button momentarily.
To disarm the Anti Car Jack alert process during the lights and siren cycles, turn the car off
then on, then press and hold the valet button for 5 seconds.
This feature requires that the user must be fully aware of the operation of this feature. If the
system goes into full alarm the remote’s will no longer function until the Anti Car Jack Feature
is disabled.
ANTI CAR JACK FEATURE
ANTI CAR JACK ALERT
DISARMING ANTI CAR JACK FEATURE
