CAR FINDER MODE
SILENT ARM / SILENT DISARM
1 Press and HOLD the Arm/ Lock button for three seconds.
2
3 The park lights will begin to flash and the siren will activate.
4 To turn off panic, press Lock or Unlock buttons on remote.
5 If no button is pressed, Panic Alarm will sound up to 1 minute then turn off
.
The doors will lock and the Starter Disable will activate. (optional)
Panic Mode
is a personal protection feature that allows you to activate your alarm from the
remote transmitter. This feature can be used to draw attention to you and your vehicle if you
feel threatened.
- Press and hold the Unlock and Trunk buttons for 3 seconds.
- The siren will chirp 5 times and lights will flash.
This feature helps in locating vehicle in a busy parking lot. It allows you hear and see your
vehicle from a distance.
1 Press then release the Lock & Unlock buttons together.
2 If the system is DISARMED, it will Arm and Lock with no siren chirps and 1 light
flash.
3 If the system is ARMED, it will Disarm and Unlock with no siren chirps and 2 light
flas
h
.
PRESS & HOLD for 3 sec
PRESS TOGETHER
ACTIVATE PANIC MODE
PRESS HOLD
+
SYSTEM PROGRAMMING -
Menu 1
PAGE 8
OWNER'S MANUAL
TRANSMITTER FUNCTIONS
AL.1
+
PAGE 9
OWNER'S MANUAL
TRANSMITTER FUNCTIONS
AL.1
AUX OUTPUT
The Aux output can be programmed for a variety of custom applications. It is
activated by holding the “Star” button. Please check with your installation center
on use and activation for this option.
PASSIVE ARMING
The Passive Arming feature is used to ensure that the vehicle is not left with the
alarm disarmed.
Type-1
When programmed for Passive Arming (Type-1) the system will
automatically arm and lock (optional) the doors 30 seconds after the last door is
closed.
Type-2
When programmed for Passive Arming with Rearm (Type-2) the system
will automatically arm and lock (optional) the doors 30 seconds after the unlock
button is pressed on the remote.
STARTER DISABLE
Starter Disable is a feature that is designed to help prevent the theft of your
vehicle. When the alarm is armed the system will interrupt the vehicles starter wire
thus disabling the vehicle from starting. Disarming the alarm will re-enable the start
circuit and allow the vehicle to start.
IGNITION AUTO LOCKS
This optional feature can be programmed to automatically lock the doors when the
ignition key is turned to the on position then automatically unlock the doors when
the ignition key is turned to the off position.
DOME LIGHT SUPERVISION
This feature is designed to turn on the interior or exterior lights of your vehicle
when the Disarm/Unlock button is pressed. The light circuit will stay active for up to
30 seconds or until the ignition key is turned to the on position.
