![Taramps TW 30 G4 Manual Download Page 9](http://html.mh-extra.com/html/taramps-0/tw-30-g4/tw-30-g4_manual_818866009.webp)
9) Alarm Functions:
X
1 DOOR OPEN WARNING:
When turning the alarm on, if there are 3 BEEPs, it
indicates that there is an open door. Close it and turn the alarm back on. If it is
not solved the alarm will cancel the door monitoring. The rest will work
normally. If the problem persists, look for a specialized service to repair the door
switch.
Through the HOME key of the TR2 and TR2-P controls, it is possible to activate the
gate operator or residential alarm, without tusing an auxiliary module, only
registering the control in the operator's central.
2 SHUTDOWN - TRIGGER LIMITER:
In case of violation, the alarm will trigger
the SIREN and will flash the TURNING SIGNALS for 45 seconds. 5 seconds after
that , it will go back to monitoring the sensors. After 4 triggerings by the same
sensor, it will be canceled, keeping the others active. It will only be monitored
again when the alarm is reset by the remote control.
- Ignition is not on;
3 AUTOMATIC LOCK:
About 8 seconds after turning on the ignition, doors will
be locked and unlocked by turning the ignition off . It will not lock if a door is left
open or turn on the ignition before closing the door. It is possible to cancel the
unlock when you turn off the ignition,
.
items 6.4 and 6.10
6 CANCELLING ULTRASOUND:
When turning the alarm on and canceling the
ultrasound,
, the power windows will not be closed. To close the
item 5.9
windows and activate the ultrasound, turn off and on the alarm by remote
control.
7 HOME function of the TR2 and TR2-P control:
- Door, hood or trunk are not opened;
4 AUTOMATIC REACTIVATION:
Automatically turns the alarm back on after
60seconds when turned off by the remote and:
- Reset function will be canceled, when activating the remote alarm function.
5 TURNING SIGNALS:
The alarm times the turning signals for 10 seconds.Press
the off button on the remote twice (2x), with the alarm off.
- Ultrasonic sensor does not detect movement. It is possible to disable,
.
item 6.5
The TR2 or TR2-P control must be registered according to the manufacturer's
instructions, as if it were a control of the same brand as the gate or residential
alarm.
Suitable for CODE LEARNING systems.
08