If you need to install equipment with a consumption higher than 200mA, relays must be
used.
The lock, unlock, auxiliary and audio equipment outputs handle a maximum of 200mA.
CENTRAL VW G6 / G7
Located above the
fuse box
34 - Brown / Red
36 - Brown/ Red
11 - Red/ Black
3 - Gray
Transform NEGATIVE alarm signal
(200mA) into PO12V
Alarm Wire
85
30
+12V
87
86
12V
Purple Wire
Alarm
T r a n s f o r m P O S I T I V E s i g n a l
( A U D I O ) ( 2 0 0 m A )
into P12V of higher power
85
30
87
+12V
86
Battery
Negative
Battery
Negative
+ACC
Audio Equipment
Transform NEGATIVE signal (200mA)
i n t o N E G A T I V E
of higher potency
30
85
87
Alarm Wire
Negative Output
86
+12V
Battery
Positive
11) VW G6 and G7 Electric Lock and Window Connections
5 Beeps
= VW UP
3 Beeps
= FIAT
4 Beeps
= VW G6
- With the door open, turn the ignition on.
- The alarm will respond informing:
1 Beep
= Universal
2 Beeps
= VW G5
Set Signal for Window/Electric Lock activation:
6 Beeps
= MOBI
-Hold the master pressed until beep 11.
To change it, press the Master key 4 times, referring to the VW G6/G7 signal.
Each press on the Master, the alarm confirms with 1 beep. After turning the
ignition off , the alarm will confirm the new setting with 4 beeps.
+
MASTER
Attention:
The trunk opener function will only work in vehicles with original electrical trunk
opening system. For a perfect operation, ground the alarm module properly . Some wire
colors may change without prior notice from the assembler. Test before making the
connections.
+
Configure
1X = Universal
2X = VW G5
3X = FIAT
4X = VW G6
5X = VW UP
6X = MOBI
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 11 function
10) Relay Connections
11
To open windows, turn off the alarm and hold down the off button on the control.
Window activation signal setting =
VW G6 / G7,
.
item 11
Function
Closes and opens the power windows, locks and unlocks the doors and opens the
:
trunk.
To open the trunk with the alarm off, hold the Auxiliary button pressed.
