+
MASTER
14
Attention:
Connect the BROWN WIRE to the HIGH BEAMS switch signal before cloning the
control, for automatic setup of POSITIVE or NEGATIVE signal type. Cloning the original Gate
control will automatically change the brown wire setting to Open/Close Automated Gate.
Programming by Master
- With the door open, turn the ignition on.
3 Beeps
= Open/Close Automated Gate
5 Beeps
= Junto com Saída Auxiliar 3
- Hold the master pressed until beep 13.
- The alarm responds by informing the current
setting:
1 Beep
= Reads Negative switch
2 Beeps
= Reads Positive switch
4 Beeps
= Reads Headlight On/Off
13) Set up Auxiliary Output 2 - brown wire
- Clone the original gate control in the TW30 G4 central
Function to open the automated residential gate through the vehicle's High beams signal.
Operation:
3) Open/Close Automated Gate.
- Connect the Brown wire to the high beams flasher signal.
1)Reads Negative switch.
2) Reads Positive switch.
Attention:
Function is compatible only with operators that use the CODE LEARNING code
system.
With the ignition on, 2 touch es on the high beams key (flash) to open or close the gate.
It is not necessary to apply any type of programming in the gate operator central.
For installing in a door switch, hood or trunk with a Negative signal ,when open.
For installing in a door switch, hood or trunk with a Negative signal ,when open.
Installation:
To change it, press the Master key the number of times referring to the desired
function. Each time you press the Master, the alarm confirms with 1 beep. After
turning the ignition off , the alarm will confirm the new setting with beeps.
Programming:
- Hold the master pressed until beep 15.
When releasing the master, the siren will
- With the door open, turn the ignition on.
sound a long beep.
confirming the recording.
- Hold down the control button that
- Turn off the ignition to exit programming.
open the gate until the alarm beeps 3,
13.1) Clone Gate Control
- Only for TW20 and TW30 G4
+
Configure
1X =
Door
-
2X = Door
+
3X = Gate
4X = Headlight
5X = Auxiliary 2
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 13 function
+
Clone
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 15 function
