TARAL 850, Instruction Manual

Page: 60 / 102

ENGINE OIL FILTER
To replace the engine oil filter, first drain all the
engine oil and turn the filter housing (1) shown in
“Figure 35” with a filter wrench counterclockwise
to remove it. Replace and tighten the filter
element.
ENGINE OIL LEVEL
Place the tractor on a level ground to check the
engine oil level. Check the engine oil level when
the engine is cool and wait until it cools if the
engine is warm.
Pull and remove the stick (2) shown in “Figure 36”
and check if the oil level is between the two lines
on it.
If the oil level is below the lines, add any oil from
"Table 6" only as much as necessary to reach the
proper level.
TRANSMISSION OIL FILTER
To replace the transmission oil filter, first drain all
the transmission oil and turn the filter housing (1)
shown in “Figure 36” with a filter wrench
counterclockwise to remove it. Replace and tighten
the filter element.
TRANSMISSION OIL LEVEL
Place the tractor on a level ground to check the
transmission oil level. Check the transmission oil
level when the transmission is cool and wait until it
cools if the transmission is warm.
Pull and remove the bolt (1) shown in “Figure 37”
and check if the oil level is between the two lines
on it.
If the oil level is below the lines, add any oil from
"Table 6" only as much as necessary to reach the
proper level.
Figure 35
1
Figure 36
3
2
1
Figure 37
1
48