background image

 

 3

 

 

Fertilizer Spreader PTS

-

100, PTS

-

160 Series

 

TO THE DEALER: 

 

 

Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual in-
structions and safety rules. Make sure all items on the Dealer

s Pre

-

Delivery and Delivery Check Lists in the 

Owner

s/Operator

s Manual are completed before releasing equipment to the owner. 

 

 

TO THE OWNER: 

 

 

Read this manual before operating your Tar River equipment. The information presented will prepare you to 
do a better and safer job. Keep this manual handy for ready reference. Require all operators to read this manual 
carefully and become acquainted with all the adjustment and operating procedures before attempting to oper-
ate. Replacement manuals can be obtained from your selling dealer. The equipment you have purchased has 
been carefully engineered and manufactured to provide dependable and satisfactory use. Like all mechanical 
products, it will require cleaning and upkeep. Lubricate the unit as specified. Observe all safety information in 
this manual and safety decals on the equipment. For service, your authorized Tar River dealer has trained me-
chanics, genuine Tar River service parts, and the necessary tools and equipment to handle all your needs. Use 
only genuine Tar River service parts. Substitute parts will void the warranty and may not meet standards re-
quired for safe and satisfactory operation. 

 

 

Record your implement model and serial number in the space provide below. Your dealer will need this infor-
mation to give you prompt, efficient service. 

 

 
 

 

Model Number: ______________________________________ 

 

 

Serial Number: _______________________________________ 

 

 

Date Purchased: ______________________________________ 

 

 

 

Summary of Contents for PTS-100

































Reviews: