Tar River PTS-100, Operator'S Manual

Page: 20 / 32

20
Fertilizer Spreader PTS - 100, PTS - 160 Series
Maintenance
After operating spreader:
•
Wash the spreader thoroughly. This is extremely important especially after spreading corrosive materials
such as fertilizer or salt. These materials are highly corrosive and will eat away at metal parts.
•
Dry the machine after washing to remove any remaining water. Moisture will cause rust to form and cor-
rode metal parts.
•
Exposed parts should be coated with a thick layer of grease for lubrication and protection.
End of season or prolonged storage:
•
Spreader should be washed and dried thoroughly.
•
Examine the spreader for any damaged or worn parts. Replace only with OEM parts to prevent voiding
warranty.
•
Check for corrosion on painted parts. It is advisable to remove any loose rust, prime and paint these parts
to avoid further corrosion.
•
All exposed moving parts should be coated with grease.
•
Store the spreader in a clean and dry location. If shelter is not possible, the spreader should be covered
from the elements.