401 Jeffreys Road
Rocky Mount, NC 27804
Tel: 252-442-0700
6.6.3.
Edge tedding
The machine is equipped with 4 independent driving wheels.
Swath tedding from grassland edges towards the center is ensured through the possibility of turning
the tedder right (Fig. 13 A) or left (Fig. 13 B).
Fig. 13
Swath tedding from edges
To turn the tedder in the working position, the user should set each wheel in the right or left position.
To this end, the press the wheel handle, and next:
a)
Turn left - tedding to the right (
b)
Turn left - tedding to the left (
placing the handle block in the steel hole of the locking sleeve.
Fig. 14
- Tedder Wheel Handle: 1) Wheel Rotation Handle 2) Wheel Rotation Handle Block 3) Locking Sleeve
Sheet 4) Fastener Hole (Left) 5) Fastener Hole (Right)
B
3
4
5
1
2