401 Jeffreys Road
Rocky Mount, NC 27804
Tel: 252-442-0700
4.
Intended use of the Tedder
The 4-rotor tedder is designed for field works related to preparing feed for animals. The machine
can be used solely for tedding cut grass, straw, or hay. The machine should be used on grass or
grazing lands, on which stones has been previously removed or where the terrain is without
stones.
Using the machine in other circumstances will be construed as inconsistent with the intended use.
Strict compliance with the requirements for the use of the machine and operation and
maintenance as recommended by the manufacturer is a prerequisite for use as intended.
The machine should be operated, serviced, and repaired by people familiar with its specific
characteristics and acquainted with the rules of conduct in terms of occupational safety.
Accident prevention regulations and all basic rules of safety and hygiene, as well as traffic
regulations must always be observed.
Unauthorized changes in design of the machine without permission of the manufacturer waive
manufacturer's liability arising due to any resulting damage or injury.
5.
Equipment, design, and principle of operation
5.1.
Basic equipment
The basic elements of the tedder include the following:
•
User Manual together with Spare Parts Catalogue and Warranty Card
–
1pc.,
•
Power take-off shaft
–
1pc.,
•
Warning plates
–
2pc.,
The machine standard equipment does not include lighting lamps. The above items can be
purchased additionally from the manufacturer or from your dealer.
