ELECTRICAL INSTALLATION
The water softener works on a 24 volt, 50 Hz electric power supply.
You must plug the transformer into a 240 volt outlet only. Be sure that the
electrical outlet you plug the transformer into is inside, as the transformer
is not designed for outdoor use.
To connect the transformer to the valve, push the female end plugs on to
the male connectors as indicated below. The two flat ends of the female
connectors should face each other to allow for an easy connection.
Should the faceplate fail to display or indicate an error code please check
that the connections are as per the diagram below, you will need to remove
the valve cover to do this.
Step By Step Guide To Plumbing The Softener
(cont)
9
Please Remember
– Only use Tablet or Pellet Salt in Your Softener!