When the transformer is first plugged in the display will flash 12.00am.
NOTE:
Each time you press a button on the fascia panel display a beeper
sounds. One beep signals that a change is accepted. If the beeper sounds
continually then a different button is required to effect the required opera-
tion.
SET THE PRESENT TIME
The display will continue to flash and the time can be advanced or moved
backwards using the
or
buttons. Holding down the buttons advances
the time at a faster rate.
If the time requires changing during normal operation, press the
SELECT
button once. The display will flash and indicate present time. You may use
the
or
buttons as described above to alter the time. Once the required
time is displayed the time may be set by pushing the
SELECT
button once
more.
SET THE WATER HARDNESS CALCULATION
The display will flash “19 hardness” (this is a pre-set factory setting).
Hardness varies from one location to another. Use the kit provided to
determine your water hardness in ppm. If necessary change to the unit
setting indicated.
Programming
11
Please Remember
– Only use Tablet or Pellet Salt in Your Softener!
PRESENT TIME
AM
12:00
WATER HARDNESS
ppm
Unit Setting
(200)
12
(220)
13
(240)
15
(260)
16
(280)
17
(300)
18
(320)
19
(340)
20
(360)
21
(380)
22
(400)
23
(420)
24
(440)
25
(460)
30
(480)
30
(500)
35
