12
PORT-O-BENDER
®
ACCESSORIES—
PRO CUT-OFF
™
Quickly, safely and easily
makes factory quality cuts
right on your Port-O-Bender
PRO CUT-OFF Features
• Lightweight aluminum construction built to last.
• Hardened and captured tool steel cutting knives
for safety and durability.
• Pays for itself by reducing scrap and eliminating
knifing damage to costly bending hinges.
• Eliminates use of dangerous utility knives and shears.
• Saves time and labor in scoring and breaking
off material.
PRO CUT-OFF Capacities
• Up to .030 aluminum. All vinyl.
• Up to 28 ga. galvanized steel
• Up to 16 oz. copper
The m
ost
revo
lutio
nary too
l
since th
e por
table
bend
er
Just roll out, cut off and in seconds you’re ready for bending!
U.S. & Foreign Pats Pend.
Note: Shear point
remains constant
at 1
1
/
2
"
from your
Bending Edge.
➛
➛
➛
➛
To Help You Do It... Faster, Easier, Better
The proper technique is to effortlessly
push your
Pro Cut-Off through the
material with a smooth, constant motion
from right to left. Do not stop in the mid-
dle or cut with a back and forth motion.
Make sure hinge clip is engaged.
1
1
/
2
"
U.S. & Foreign Pats Pend.
Layout coil to measurements along the
length of your
Port-O-Bender.
2.
Leave
Port-O-Bender open, use Pro
Cut-Off to cut coil to your length and
you're ready to bend!
3.
Draw coil through
Side-Winder and
into open jaws of your
Port-O-Bender.
1.
SIDE-WINDER
™
Coil Holder
Keeps the coil at your side—
Where you need it!
Works in tandem with your
Port-O-Bender and
PRO CUT-OFF to form
a complete “trim shop”
*
When using Tapco
SIDE-WINDER,
PRO CUT-OFF must be used
to cut off material. Both optional
accessories shown with
PRO III Port-O-Bender.
SIDE-WINDER Features
•
Attaches in seconds to the end of your
PRO III
Port-O-Bender, standard or heavy duty models.
•
Allows you to feed coil directly into the jaws of
your
Port-O-Bender. Uses your PRO CUT-OFF to
give you factory quality cut offs.
*
Speeds up
production, decreases waste.
•
Helps eliminate damage from handling coil stock,
especially on windy days.
•
Holds up to 24"x100' coil (when used with Pro-
Stand). Weighs only 25 lbs.
•
New improved versatility! Coil can be drawn out
finished side up or down in seconds depending
on how it’s loaded in the
SIDE-WINDER.
New and
Impr
oved
New and
Impr
oved
Using your
Pro Cut-Off
(Coil loaded
finished side up)
