4
SETTING UP YOUR PORT-O-BENDER
®
Hinge Clip Installation
The Hinge Clip keeps the Moving Hinge in position for
ease of aligning material. It can also prevent rippling of
the coil during cut off operations.
To install Hinge Clip, locate predrilled hole on bottom
center of Moving Hinge. Align holes in Clip and Hinge
as shown and insert Phillips head screw provided.
Note: You must engage hinge clip when using
Pro Cut-Off.
Faspin
Locking Handle
Handle
Plug
Hemming
Handle
Hex Bolt
Hemming Handle Installation
The PRO-III Hemming Handle As-
sembly includes: (1) Hemming Han-
dle, (2) Handle Plugs, (2) Faspins, (2)
Hex Bolts.
Insert Hex Bolt through Locking Handle
of your Port -O-Bender and into base
of Hemming Handle as indicated us-
ing the 3/8
"
Hex Bolts provided. HAND
TIGHTEN ONLY. Repeat for other side.
Now tighten the 3/8
"
Hex Bolts with a
9/16
"
wrench. Handle can be detached
from now on by simply removing the
Faspins.
Faspin
1
/
4
-20 x 1
1
/
2
"
Screw
Handle
Plug
Moving
Hinge
1
/
4
-20
Lock Nut
T-Handle
Wrench
Exploded view of Handle Assembly —
First insert one end of Handle Plug into
Lifting/Bending Handle and install
Faspin through holes.
Remove the combination Lifting/Bend-
ing Handles from each end of the Port -
O -Bender by removing the Faspins as
shown.
Lifting/
Bending
Handle
Secure
with
1
/
4
-20
Lock Nut
Next, insert Handle Assembly into hole
in bottom of Moving Hinge. Align hole
in hinge with Handle Plug and insert
screw using Allen wrench as shown.
Secure with 1/4-20 Lock Nut.
Lifting/Bending Handle Installation
