TAO F125 Owner'S Manual Download Page 9

Page: 9 / 76

Never permit anyone other than an adult to start the ATV.

Drain gasoline

from

the fuel tank and carburetor prior to transporting the ATV.

Also for storage over 48hrs.

The fuel tank and carburetor should be drained for any long periods of storage and for winter storage of the vehicle.

Caution the child and others near the vehicle not to get close to or touch any moving parts or any heated areas such as the engine and
exhaust pipe.

Never let your child operate an ATV without close adult supervision (a child under 1

should not operate this ATV even with adult

supervision.

Promptly correct your child if he or she begins to ride beyond his or her abilities and, if necessary

If the child rides beyond his or her abilities, or rides in terrain that is t

oo diffi

cult, he or she may lose control of the ATV, causing an

accident.

Introduce new riding situations slowly and make sure the riding areas do not exceed your child’s skill level.

SAFETY INFORMATION (continued)

Summary of Contents for F125













































































Search results

Summary of Contents for F125

Reviews:

Brands by name

Popular brands

TAO F125, Owner'S Manual

Search results

Summary of Contents for F125

Reviews:

Brands by name

Popular brands