TAO F125 Owner'S Manual Download Page 4

Page: 4 / 76

IMPORTANT MANUAL INFORMATION

FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS INJURY
OR DEATH.

Important information is distinguished in this manual by the following notations:

Product and

specifications

are subject to change without notice.

IMPORTANT NOTICE

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that

follow this symbol to avoid

possible injury or death.

A NOTICE indicates special

precautions that must be taken

to avoid damage to the vehicle

or other property.

A TIP provides key information

to make procedures easier

or clearer.

A WARNING indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

TIP

NOTICE

The

F125

ATV is designed and manufactured for off-road use only. It is illegal and unsafe to operate this

ATV on any public street, road or highway.

This ATV complies with all applicable off-road noise level and spark arrester laws and regulations.

Please check your local riding laws and regulations before operating the F125 ATV.

This ATV should not be operated by anyone under 14 years of age.

Summary of Contents for F125













































































Search results

Summary of Contents for F125

Reviews:

Brands by name

Popular brands

TAO F125, Owner'S Manual

Search results

Summary of Contents for F125

Reviews:

Brands by name

Popular brands