Dimensions Vertical
Yoke Vertical VX 8/VX 8.2
Yugo Vertical VX 8 / VX 8.2
Yoke Vertical VX 8 / VX 8.2
Joch vertikal VX 8 / VX 8.2
Yoke Vertical VX 8 / VX 8.2
Giogo verticale VX 8 / VX 8.2
Juk Verticaal VX 8 / VX 8.2
Yoke Vertical VX 8 / VX 8.2
Jarzmo pionowe VX 8 / VX 8.2
243 [9.6]
311 [12.2]
295 [11.6]
14.0 [0.55]
Ø11.0
[Ø0.43]
TY
P
115 [4.5]
40 [1.6]
314 [12.4]
E
D
I
S
T
N
O
R
F
TOP
Rigging and Safety Procedures
The Tannoy Professional hardware covered in this guide has been designed to off er quick, simple, cost effective
and secure solutions for mounting specifi c Tannoy Professional loudspeakers. This hardware has been designed
and manufactured with a high safety load factor for its specific role. To ensure the safest possible use of the
hardware covered in this guide, it must be assembled in strict accordance with the instructions specified. The
information in these Quick Start Guides relating to the assembly and the safe use of these accessories must be
understood and followed.
The installation of Tannoy Professional loudspeakers – using the dedicated hardware – should carried out only
by fully qualified installers, in accordance with all the required safety codes and standards that apply at the
place of installation.
WARNING:
As the legal requirements for mounting, suspending, hanging, fl ying or rigging equipment change
from country to country, please consult your local safety standards offi ce before installing any product. We also
recommend that you thoroughly check any laws and bylaws prior to installation.
Tannoy Professional hardware has been designed for use with specifi c Tannoy Professional loudspeakers,
and is not designed or intended for use with any other Tannoy Professional products, or any other devices.
Using Tannoy Professional hardware for any purpose other than that indicated in this guide is considered to be
improper use. Such use can be very dangerous: overloading, modifying, damaging, or assembling in a manner
other than that clearly stated in the Operation will compromise safety. The component parts of any Tannoy
Professional hardware device must only be assembled using the accessory kits supplied and in strict compliance
with the Quick Start Guide. The use of other accessories or non-approved methods of assembly may result in
an unsafe hardware system by reducing the load safety factor. Welding, or any other method of permanently fi
xing hardware components together or to the integral fi xing points in the cabinet, should never be used.
Whenever a Tannoy Professional loudspeaker is fi xed to a surface using a Tannoy Professional hardware device,
the installer must ensure that the surface is capable of safely and securely supporting the load. The hardware
employed must be safely, and securely attached both to the loudspeaker and also to the surface in question,
in accordance with the Quick Start Guide, using only the fixing holes provided as standard and covered in the
manual. Secure fi xings to the building structure are vital. Seek help from architects, structural engineers or
other specialists if in any doubt. All loudspeakers fl own in theatres, nightclubs, conference centres or other
places of work and entertainment must be provided with an independent, correctly rated and securely attached
secondary safety restraint in addition to the principal hardware device. This secondary safety restraint must
prevent the loudspeaker from dropping more than 150 mm (6") should the principal hardware device fail.
22
23
Quick Start Guide
VX Yoke Accessory
Summary of Contents for VX Yoke
Page 19: ......
