General Instructions
5. Replace
pop-up
drain stopper
in
drain body
, with
‘o’-ring
in place,
and align stopper hole with guide and opening.
drain
stopper
flange
drain
body
align hole in
drain stopper
with guide rod
opening
(pointed toward
back wall)
sink
6. Reinsert
rod ball assembly
back into
drain body
and
through hole in
drain stopper
.
7. Insert
pop-up stem
through
hole in faucet body. Attach
lift
rod
to
pop-up stem
by
inserting
stem
through hole in
lift rod
. Reassemble
rod
guide
,
washer
and
nut
, and
tighten firmly.
8. Adjust
pop-up stem
to correct
height by opening drain, and sliding
lift
rod
and
rod clip
at the same time onto
rod/ball assembly
. Readjust
lift rod
screw
if necessary, hand-tighten.
rod/ball
assembly
drain
body
pop-up
stem
rod guide
washer
and nut
Side view
faucet and
pop-up
assembly
9. Make connection to supply
lines.
10. Turn on water supply and
check for leaks.
