Installing the Software and the USB Device Driver
28
Installing the USB Device Driver
Have you already installed the supplied software?
Before connecting an RTR-500GSM to your computer via USB,
make sure to install the supplied software into the computer.
Connecting an RTR-500GSM to a Computer
Connect the RTR-500GSM with the supplied USB communication cable to
the computer.
- Make sure that the USB cable is inserted fully, so as not to cause an improper
connection.
- Login using a User Account with Administrator (Computer Administrator) rights.
For Windows XP
By connecting the RTR-500GSM to the computer, the [Found New
Hardware Wizard] window will automatically open. Please follow the
procedure on the next page to install the USB device driver.
- If that window does not automatically open, installation may have been
completed or failed. Please check whether the USB device driver has been
properly installed by following the directions on page 29.
For Windows 7 or Windows Vista
By installing the supplied software, the USB device driver will also be
automatically installed. Open the application to make settings for using the
RTR-500GSM.
Summary of Contents for RTR-500GSM
Page 2: ......
Page 17: ...Getting Ready This section provides instructions on getting the RTR 500GSM ready to use ...
Page 39: ...Other ...
Page 54: ......