![background image](http://html.mh-extra.com/html/tando/rtr-500gsm/rtr-500gsm_introductory-manual_817109042.webp)
Other
40
Remote Units and Repeaters
The following outline shows the procedures for connecting a Remote
Unit / a Repeater to the computer.
Connecting a Remote Unit (Optical Communication)
1. Open the software application.
2. When the direction appears in the application window, connect
the Base Unit with a USB communication cable to the computer.
3. Place the Data Logger (Remote Unit) face down on the RTR-
500GSM (Base Unit), making sure that the optical
communication areas are aligned properly.
Optical Communication
Areas
Connecting a Repeater
1. Open the software application.
2. When the direction appears in the application window, connect
the Repeater with a USB communication cable to the computer.
USB Communication Cable
* A Repeater can be connected to the computer simultaneously with the Base
Unit as shown in the figure above.
Summary of Contents for RTR-500GSM
Page 2: ......
Page 17: ...Getting Ready This section provides instructions on getting the RTR 500GSM ready to use ...
Page 39: ...Other ...
Page 54: ......