T&D VLD-5EU User Manual Download Page 86

Page: 86 / 104

Saving Recorded Data

If you have edited any data after viewing it the Graph display, we
suggest that you save it as you see necessary.

3 Ways to Save Files: from the [File] Menu

Overwrite All Data

Will save any changes to fi le without changing File Name and Saving
Location.
The same operation can be carried out from [Save] in the Toolbar.

Save All Data as...

Save with a new File Name.

Save Display Data as...

Save only that data in the current display.
This is handy when you wish to save only the desired data.

EX:

Save All Data as...

Click [Save All Data as...] in the [File] Menu.

Specify the [Location] and enter a [File Name].

Enter File

name

Assign a Location

[Save]

button

Click [Save] to complete the saving process.

Summary of Contents for VLD-5EU









































































































Search results

Summary of Contents for VLD-5EU

Reviews:

Related manuals for VLD-5EU

Brands by name

Popular brands

T&D VLD-5EU, User Manual

Search results

Summary of Contents for VLD-5EU

Reviews:

Related manuals for VLD-5EU

Brands by name

Popular brands