T&D VLD-5EU User Manual Download Page 37

Page: 37 / 104

Open Registration File: from the [File] Menu

Open existing Remote Unit Registration Files.

In the [File] Menu, select [Open Registration File].

Specify the Remote Unit Registration Info File you wish to open,

and click the [Open] button to view it.

Save Registration Contents to File: from the [File] Menu

Save the currently displayed Group and Remote Registration
Contents to a Remote Registration File.

In the [File] Menu, select [Save Registration Contents to File]

Specify the [Location] and enter a [File Name].

Click the [Save] button to save.

Registration Info opened from a saved fi le cannot be edited or changed.

Save in Text File: from the [File] Menu

Save the currently displayed Group and Remote Registration
Contents to a Text File.

In the [File] Menu, click [Save in Text File].

Specify the [Location] and enter a [File Name].

Click the [Save] button to save.

Text File cannot be read.

Registration Info opened from a saved fi le cannot be edited or changed.

Summary of Contents for VLD-5EU









































































































Search results

Summary of Contents for VLD-5EU

Reviews:

Related manuals for VLD-5EU

Brands by name

Popular brands

T&D VLD-5EU, User Manual

Search results

Summary of Contents for VLD-5EU

Reviews:

Related manuals for VLD-5EU

Brands by name

Popular brands