background image

 

20

Copying tape 

  

 

Two tape recorders involved

 

a) Copying from TAPE 1 to TAPE 2 or vice versa.

 

Connect  one  tape  recorder  to  the  TAPE  1  socket  and 
another tape recorder to the TAPE 2 socket. To copy from 
the TAPE 1 machine to the TAPE 2

 

machine depress the TAPE COPY 1

2 button.

 

To copy from the TAPE 2 machine to the TAPE 1 machine 
depress the TAPE COPY 2

1 button.

 

PROCEDURE.

 

Start the two machines and control the recording level on 
the machine set to RECORD. A trial run may be necessary 
to avoid peak distortion. See page 22 for advice on 
monitoring.

 

NOTE!

 

You have the great advantage that copying from one tape 
recorder to the other can take place while you listen to a 
program selected with either of the buttons FM, AM, 
PHONO 1, PHONO 2.

 

b) Copying  from TAPE 1 or TAPE 2 to TAPE 3.

 

Connect a tape recorder to the TAPE 1 socket or the TAPE 
2 socket. To copy, depress the appropriate TAPE MON. 
button and follow the procedure described on page 21.

 

Three tape recorders involved

 

a) Copying from TAPE 1 to TAPE 2 & TAPE 3.

 

Connect one tape recorder to each of the TAPE sockets and 
one to the TAPE 3 jack. Depress the

 

 

TAPE MON. 1 button and the TAPE COPY 1 -> 2 button. If 
you now start all the machines, you will copy from TAPE 1 to 
TAPE 2 &

 

TAPE 3 without tone and volume controls. At the 

same time you can listen to the program through the speakers. 
By depressing the PREAMP. REC. button you can copy from 
TAPE 1 to TAPE 2 without tone and volume controls, and 
from TAPE 1 to TAPE 3 with tone and volume controls.

 

b) Copying from TAPE 2 to TAPE I & TAPE 3.

 

Connect the tape recorders as for a). Depress the TAPE MON. 
2 button and the TAPE COPY 2   --> button. Start the 
machines, and you will copy from TAPE 2 to TAPE 1 & 
TAPE 3 without tone and volume controls, etc. as for a). 
(Interchange TAPE 1 & TAPE 2).

 

WARNING!

 

Depressing the PREAMP REC button reduces the 
amplification by 30 dB. Therefore be careful not to release the 
button   when playing at high volume. Otherwise you may 
damage your speakers.

 

 

 

Summary of Contents for TR-2075

























Reviews: