21
Recording on a third tape recorder with or without audio controls
If you want to record on a third tape recorder with or
without the effect of the audio controls, connect the
tape recorder by means of a 3-pole jack plug to the
TAPE 3 jack on the extreme right of the front panel,
Any program that could be recorded on a tape recorder
connected to TAPE 1 or TAPE 2 socket (or both) will
now also be recorded on this third tape recorder.
If you want to control the tonal balance and the volume
of the program to be recorded, depress the PREAMP
REC. button on the front panel The speaker volume
will be reduced to a suitable monitoring level (source
test) and the volume, tone, balance, loudness, and filter
controls will be active as shown in the diagram below.
Although the source test can be carried out from the
receiver, the tape test can only be carried out from the
tape recorder itself.
WARNING!
Depressing the PREAMP REC button reduces the
amplification by 30 dB. Therefore be careful not to
release the button when playing at high volume.
Otherwise you may damage your speakers.
Summary of Contents for TR-2075
Page 1: ......
