Operating the Equipment Locally
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
Page 4-21
ST.TM.E10074.1
PMT PID
¬
Left
Logical Channel :
+
®
Right
`3 (0003h)’
—
l
Ins
Enter
l
l
Del
Update using softkeys
Quit
l
4.7.4
Remote Control Menu
Overview
The
Remote Control
Menu
is selected from the
System Menu
by pressing
the Remote Control softkey. This menu provides options for amending
the remote control options. See Figure 4.9 for the
Remote Control
Menu
structure.
IP Address Option
To access the IP Address option, press the IP Address softkey in the
Remote Control Menu
. The Encoder must be reset if the IP address is
changed.
IP Address
¬
Left
Encoder IP Address :
+
®
Right
`172.16.248.91’
—
O
Enter
l
O
Update using softkeys
Quit
l
MAC Address Option
The MAC Address option is found in the
Remote Control Menu
. It cannot
be changed.
Network Mask Option
To access the Network Mask option, press the Network Mask softkey in
the
Remote Control Menu
.
Network Mask
¬
Left
Network Mask :
+
®
Right
`255.255.0.0’
—
O
Enter
l
O
Update using softkeys
Quit
l
Gateway Address Option
To access the Gateway Address option, press the Gateway Address
softkey in the
Remote Control Menu
. This gives the default gateway
address used on the Ethernet network interface connected via the 10BaseT
socket. Any communications to network hosts not on the local IP network
will be sent to this address.
