Operating the Equipment Locally
Reference Guide: EN8000 MPEG-4 Part 10 (H.264/AVC) Encoders
Page 4-3
ST.RE.E10233.1
4.1
Local Control
4.1.1
Read This First!
This Reference Guide has been written to give emphasis to control through the webpages.
Chapter 5 explains each of the options available.
4.1.2 Introduction
At switch-on the Encoder runs through a boot sequence (boot time without any option modules
is approximately 85 seconds). The
Summary Screen
is displayed.
4.1.3
Navigating the Display Screens
The menu options on the display are selected and amended by one of the four navigation keys
(shown as left, right, up and down arrows) and Enter and Cancel buttons (see Figure 4.1).
The function of the navigation keys depends where you are in the menu structure. See the
following sections for details.
Figure 4.1: Navigation Keys and Buttons
From the
Summary Screen
select the
Main Menu
by pressing ENTER, RIGHT, UP or
DOWN.
Return to the
Summary Screen
from the
Main Menu
by pressing LEFT.
4.1.4
Navigating the Menus
To navigate the menus, valid keys are:
•
DOWN
Scrolls down to next option in current menu
•
UP
Scrolls up to previous option in current menu
•
RIGHT
Advances to next menu level in hierarchy or selects an option for editing
•
LEFT
Reverts to previous menu level in hierarchy
4.1.5
Changing a Setting
For Multiple Choice Entry
Valid keys are:
•
DOWN
Scrolls down to next option
•
UP
Scrolls up to previous option
•
ENTER Accepts
new
setting
•
CANCEL
Leaves setting unchanged
ENTER
button
CANCEL
button
Navigation keys
(Left, Right,
Up, Down)
