TANDBERG Videoconferencing System
41
General use
Web-interface
It is possible to access and maintain the system remotely via a local area network (LAN) using a standard Web-
browser.
Connect your system to a local area network.
Configure your codec:
• Press MENU, select ‘
Terminal Settings
’, ‘
LAN Settings
’
• Specify IP-assignment ‘
DHCP
’ or ‘
Static
’. If DHCP is selected no other settings are needed. If Static is
selected, ‘
IP-address
’, ‘
IP-subnet mask
’ and ‘
Gateway
’ must be specified.
Example:
IP-assignment:
Static
IP-address:
196.9.200.129
IP-subnet mask:
255.255.255.0
Gateway:
196.9.200.21
See ‘LAN Settings’ in ‘Advanced use’ for further information.
• Start your Web-browser. In the address field type the IP-address of the codec. Enter the password and the
Web-page of the codec will be shown. The default password is ‘
TANDBERG
’.
T
HE
SYSTEM
MUST
BE
RESTARTED
BEFORE
CHANGES
IN
THE
‘LAN S
ETTINGS
’
MENU
CAN
TAKE
EFFECT
.
NOTE
Text Chat / Closed Captioning
While in an ISDN or IP call to another system supporting Text Chat (T.140), select ‘Text Chat’ from the Web-page
of the codec. Enter text in the window displayed. When selecting ‘Send Text’, the text will be displayed on the
local and far-end monitor as shown below:
The local Text Chat window can be closed manually from the Web-interface by pressing ‘Close Window’. It will
also close automatically after a few minutes without activity.
