TANDBERG 1700 MXP User Manual Download

Page: 86 / 142

D 13954.01
MAY 2006

TANDBERG 1700

MXP

USER GUIDE

Video Algorithm

Control Panel > Call Quality Settings

CANCEL

Select this icon and press

to leave the menu undoing any
changes.

RESTORE DEFAULTS

Select this icon and press

to restore the default settings.

SAVE

Select this icon and press

to leave the menu putting

changes into effect.

VIDEO ALGORITHM

The system will automatically select the best video algorithm based
on the video source and the capabilities of the remote system. Use
this menu to disable video algorithms in case you have interoperability
issues when calling other systems.

H.21

Legacy video compression and decompression. The system will always
have H.261 enabled. Consequently, there is no way of unchecking
H.261.

H.23

Normal video compression and decompression.

H.2

Bandwidth efficient video compression and decompression

Summary of Contents for 1700 MXP















































































































































Search results

Summary of Contents for 1700 MXP

Reviews:

Related manuals for 1700 MXP

Brands by name

Popular brands

TANDBERG 1700 MXP, User Manual

Search results

Summary of Contents for 1700 MXP

Reviews:

Related manuals for 1700 MXP

Brands by name

Popular brands