TANDBERG 1700 MXP User Manual Download

Page: 91 / 142

D 13954.01
MAY 2006

TANDBERG 1700

MXP

USER GUIDE

Video Quality

Control Panel > Call Quality Settings

CANCEL

Select this icon and press

to leave the menu undoing any
changes.

RESTORE DEFAULTS

Select this icon and press

to restore the default settings.

SAVE

Select this icon and press

to leave the menu putting

changes into effect.

VIDEO QUALITY

Different video sources need different Video
Quality Settings. Main Camera, VCR, AUX
and Split Screen have

Motion

as default. PC,

Document Camera and VNC have

Sharpness

default.

Auto.

The system chooses the best of Motion

or Sharpness depending on picture layout and
bandwidth.

Sharpness.

Optimized for sharp video (4CIF/4SIF,

SVGA, XGA, w720p).

Motion.

Optimized for smooth motion video (CIF/

SIF or w288p for low bandwidths, 448p/400p,
Interlaced CIF (iCIF) / Interlaced SIF (iSIF) or
w448p for high bandwidths).

Summary of Contents for 1700 MXP















































































































































Search results

Summary of Contents for 1700 MXP

Reviews:

Related manuals for 1700 MXP

Brands by name

Popular brands

TANDBERG 1700 MXP, User Manual

Search results

Summary of Contents for 1700 MXP

Reviews:

Related manuals for 1700 MXP

Brands by name

Popular brands