D 14127.01
01.2008
40
TANDBERG 150
MXP
ADMINISTRATOR’S GUIDE
Table of
Contents
Trademarks &
Copyright
Patents &
Disclaimers
Safety/
Environmental
To Get You
Up and Going
About
Administrator
Settings
General
Settings
Audio
Settings
Security
Settings
Network
Settings
Profiles &
Wizard
Diagnostics
Reset &
Upgrade
TANDBERG 150
MXP
ADMINISTRATOR’S GUIDE
Network
Settings
Authentication ID / Authentication Password.
The system sends the Authentication ID and
Password to a Gatekeeper for authentication.
The authentication is a one way authentication
from the endpoint system to a Gatekeeper,
i.e. the endpoint is authenticated to the
Gatekeeper. If the Gatekeeper indicates that no
authentication is required, the endpoint will still
try to register.
Gatekeeper Discovery
Auto.
The system will automatically try to regis-
ter to any available gatekeeper. If a gatekeeper
responds to the request sent from the codec
within 30 seconds this specific gatekeeper will
be used. This requires auto discovery on the
gatekeeper as well. If no gatekeeper responds,
the system will not use a gatekeeper for mak-
ing H.323 calls and hence an IP-address must
be specified manually.
Manual.
The system will use a specific gate-
keeper identified by Gatekeeper IP-address.
Authentication Mode Auto.
If Authentication
Mode is set to Auto and the gatekeeper
indicates that it requires authentication, the
endpoint will automatically try to authenticate
itself to the Gatekeeper.
Authentication Mode Off.
If Authentication
Mode is set to Off the system will not try to
authenticate itself to a Gatekeeper, but will still
try a normal registration.
Gatekeeper IP Address.
This is where you
specify the gatekeeper IP-address that is used
if you specify
H.323 Call Setup: Gatekeeper
and
Gatekeeper Discovery: Manual
.
MANIPULATED PICTURE
H.323 Settings – the Gatekeeper Settings
If your system is part of a TANDBERG
Expressway™ firewall traversal solution
and is placed outside the firewall, you
should register the IP address of your Border
Controller as the Gatekeeper IP address and
set
H.323 Call Setup
to
Gatekeeper
.
H.323 – The Gatekeeper Settings Details
See
General Settings – an overview
for a
description.
