5. Remove the four M3 button socket head screws from the underside of the
painted cover.
6. Turn the unit back upright so that it is resting on its feet.
7. Slide the painted cover off toward the back of the unit.
8. Remove the four flat-head screws that hold the door panel assembly to the
chassis.
9. Disconnect the power, serial (DACI), and SCSI cables from the drive.
10. Remove the M3 x 6mm pan head screw and retainer that hold the drive to the
chassis.
11. Carefully folding the three cables clear, slide the drive out along the guide
channels molded into the chassis.
12. Remove the four M3 x 6mm pan head screws that holds the drive to the
mounting plate.
Tandberg SLR Autoloader Servive and Repair Manual
67