Tandberg Data
Chapter 2 - Installation
Mounting Tabletop Units
Tabletop units require no mechanical assembly. Place the unit on a desk, table,
server top, or other stable, horizontal surface with at least 2-inch (5 cm) clearance
behind it to allow free flow of cooling air from the fan.
CAUTION
:
Make sure the Autoloader stays in a horizontal position while
operating. Do not operate it on its side.
Mounting Rack Units
The compact size of the SLR Autoloader permits the mounting of up to
two
units in
a single shelf of a standard 19” rack. Both units attach to a rack chassis. The units
are secured to the rack chassis by rear brackets and fastened in place by two
machine screws. The chassis and both units fit within a 4U rack height.
Note:
Before mounting the SLR Autoloader(s), you must order a separate hardware
kit for converting the unit(s) from a tabletop to a rack mounted one.
Rackmount Installation Process
1. Add the rack chassis to the rack frame.
2. Fasten one or two SLR Autoloader chassis to the installed rack chassis.
Tandberg SLR Autoloader Service and Repair Manual
19