SDLT 600 Product Manual
Chapter 5: Using Your Tape Drive
81-81184-02 REV A01
March 2004
5-9
5.5
Front Panel Controls and LEDs
All controls and LEDs are on the tape drive’s front panel. See
Figure 5-2
for details. Use these controls
and LEDs to operate the tape drive and monitor the SDLT 600 tape drive system’s activities.
Table 5-2
on page 5-10
and
Table 5-3 on page 5-11
describe Control and LED functionality.
Figure 5-2.
SDLT 600 Tape Drive Front Panel
On the SDLT 600 tape drive, the leftmost LED is dual color (green/orange). This LED is the Density
Indicator. When you insert a Super DLTtape II data cartridge, this LED illuminates green. When the
tape drive detects a backward read compatible (BRC) data cartridge, this LED illuminates orange.
(The SDLT 600 tape drive backward reads Super DLTtape I data cartridges formatted in an SDLT 220
or SDLT 320 tape drive, or DLTtape VS1 data cartridges formatted in a VS160 tape drive.)
If a DLTtape IV data cartridge is inserted, the Drive Density LED is off.
Table 5-2
summarizes these
combinations.
Green/Orange LED
Green LED
Yellow LED
Eject Button
iTalk Port
(Cleaning Required)
(Drive Density)
(Drive Status)
Summary of Contents for SDLT 600
