Tandberg Data SDLT 600, Product Manual

Page: 17 / 126

SDLT 600 Product Manual Chapter 1: Introduction
81-81184-02 REV A01 March 2004 1-3
•
Appendix B, “DLTtape VS1 Data Cartridge,” provides information for the DLTtape™ VS data
cartridge including handling and inspection procedures, information on the write-protect switch,
and how to load and unload a data cartridge.
•
“Glossary” provides definitions for technical terms and acronyms used throughout the document.
1.5 Conventions
This manual uses the following conventions to designate specific elements.
1.6 For More Information
The web site http://www.dlttape.com includes more valuable information about SDLT systems; or to
locate very specific product-related information, visit http://www.quantum.com/SDLT.
To contact Tandberg Technical Support, call +49-231-5436-142.
Table 1-1. Typographical Conventions
Element Convention Example
Commands Uppercase (unless case-sensitive) FORMAT UNIT
Messages Uppercase INVALID PRODUCT
NUMBER
Hexadecimal Notation Number followed by lowercase h 25h
Binary Notation Number followed by lowercase b 101b
Decimal Notation Number without suffix 512
Acronyms Uppercase POST
Abbreviations Lowercase, except where standard
usage requires uppercase Mb (megabits)
MB (megabytes)
Dimensions in Figures No units specified (Inches understood
unless otherwise specified) 0.57 EJECT DISTANCE