Tandberg Data SDLT 600, Product Manual

Page: 72 / 126

Configuring and Installing a Tabletop Tape Drive SDLT 600 Product Manual
4-24 March 2004 81-81184-02 REV A01
AC Power Cable
An AC power cord is supplied with each tabletop unit. Carefully inspect the power cord and ensure
that the cord is the appropriate cord for your country or region based on the criteria below.
The AC power cord used with the tabletop unit must meet the following criteria:
•
The power cord should be a minimum of 18/3 AWG, 60 °C, type SJT or SVT.
•
UL and CSA certified cordage rated for use at 250 VAC with a current rating that is at least 125%
of the current rating of the product.
•
You must terminate the AC plug in a grounding-type male plug designed for use in your country or
region. It must also have marks showing certification by an agency acceptable in your country or
region.
•
The tabletop unit cord connector must be an IEC type CEE-22 female connector.
•
The cord must be no longer than 4.5 meters (14.5 feet).
•
The cord must be FCC compliant with emissions specifications.
Figure 4-12 shows the AC power cord plug-end types for 115 VAC and 220/240 VAC usage.
Figure 4-12.
AC Power Cord Connector Types
W
ARNING
! Do not attempt to modify or use a tabletop 100–115 V AC
power cord for 220–240 V AC input power. Modifying the
power cord in any way can cause personal injury and severe
equipment damage.