Tandberg Data MSERIES USER, User Manual, Page: 72 / 190

Chapter 3 Changing the Library Configuration
Changing the Wide Negotiation Setting
56 Tandberg Data M-Series User’s Guide
To enable or disable
Sync Negotiation
:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Sync Negotiation
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Sync Negotiation
setting. The available settings are
Enabled
(default) and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Changing the Wide Negotiation Setting
3
The
Wide Negotiation
option controls whether the library robotics
negotiates wide data transfer mode. Normally, this negotiation is
performed by the host.
To enable or disable
Wide Negotiation
:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Wide Negotiation
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Wide Negotiation
setting. The available settings are
Enabled
(default) and
Disabled
.
Note:
This option does not enable or disable wide data transfers; it
only controls the ability of the library to negotiate for such
transfers.