Tandberg Data MSERIES USER, User Manual, Page: 114 / 190

Chapter 7 Running the Demonstration Programs
Running the Demo 6 Program
98 Tandberg Data M-Series User’s Guide
Running the Demo 6 Program
7
The
Demo 6
program causes the X, Y, and Theta axes to move randomly.
To run the
Demo 6
program:
1
Access the
Demo Programs
screen (see Accessing the Demo Programs
Screen on page 91).
2
Press the
Up
or
Down
buttons to select
Demo 6
.
3
Press
Select
.
The
Demo 6
program starts.
4
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration program
number, the number of cycles completed, and the status of the test:
pass or fail.
5
Press
Back
to return to the
Demo Programs
screen.