Tanda AQUATOP, Installation Manual, Page: 9 / 239

MAN-AT-A2-1 Manual Aquatop (2019) 1
A2-1 - Constructional preparations: Underwater mount - In niche
General:
•
Level control is necessary to install and use an automatic slatted cover. Provide an
overflow and a refilling system to guarantee the correct level in case of a skimmer
pool.
•
Do not place any obstacles in the back or side walls which can interfere with the slats.
For example: skimmer covers, ladders, etc…
•
Roman ends, rectangular ends and other particular shapes cannot always be rolled up
completely.
•
To comply with the European standard EN_16582-1/2/3, you need to cover the rollo
cover pit.
Concept:
•
The Rollo cover is integrated in a niche behind the pool.
•
The roller needs to be minimum 3cm under the water level.
•
Drive: external electric, external hydraulic or in-roller motor.
Options:
•
SCUBA-drive® plates avoid the use of wall duct.
•
See chapter “
O2 – Finishing: Underwater mount – In niche / in pool
”
•
The niche can be covered with wooden or plastic gratings in combination with a beam
or adjustable brackets.
•
A Coverwash® system can be installed at the backside of the beam.
Target values:
(Valid for pools till 6m width – exact diameter can be found on the quotation of T&A
and the first page of the manual of each project)
* On demand
Cover length (m) (stairs incl.) 6 8 10 12 14 16 20 25
Diameter (
ø
) Rollo cover ( mm)
Slat dimension : 60 x 14 mm
420 480 520 580 610 640 705 780
Diameter (
ø
) Rollo cover ( mm)
Slat dimension : 67,5 x 16,5 mm
440 500 540 600 640 680 720 820
SCUBA wall plates can be used?
YES YES YES YES YES
* * *